Search Results

This document recommends criteria for the control and display of communications and navigation equipment on the flight deck. The equipment includes: a Communications: Ultra High Frequency (UHF), Very High Frequency (VHF), and High Frequency (HF) Radios, Cabin/Service Interphones, Public Address (PA), Select Call (SELCAL), Call Select (CALSEL), Satellite Communications (SATCOM). b Navigation: Very High Frequency Omnidirectional Range (VOR), Tactical Air Navigation (TACAN), Automatic Direction Finder (ADF), Distance Measuring Equipment (DME), Instrument Landing System (ILS), Markers (MKR), Omega, Very Low Frequency (VLF), Inertial Navigation Systems (INS), Inertial Reference Systems (IRS), Satellite Navigation (SATNAV), Low Range Radio Altimeter (LRRA). c Weather Radar d Data Link: Company, Air Traffic Control (ATC) Transponders (Mode-S) and others.

This document recommends criteria for the design, installation and operation of panels, controls, and displays on the flight deck of transport aircraft.

This document recommends criteria for the design, installation and operation of panels, controls, and displays on the flight deck of transport aircraft.

This document recommends criteria for the layout and for the design, installation, and operation of flight deck facilities for transport aircraft.

This document recommends criteria for the layout and for the design, installation, and operation of flight deck facilities for transport aircraft.

This document recommends criteria for the design and installation of flight crew rest facilities (FCRF) on transport category aircraft when operations with an augmented flight crew are performed. NOTE: Within this ARP, the term “must” will indicate items required for compliance with outside known government regulations, especially 14 CFR Part 117. “Shall” describes sections which are required if this ARP is used as a means of compliance. The term “should” will indicate optional requirements, preferences, and recommendations of the approving SAE committee. Wherever noted and bracketed as [FAA] or [EASA], this document includes agency regulations for reference that are not otherwise evaluated herein.

This document recommends criteria for the design and installation of flight crew rest facilities on commercial transport aircraft capable of ultra long-range operations with augmented/enlarged crew complement.

This document recommends criteria for the design and installation of Autopilot, Flight Director and Autothrust Systems. These three systems are highly interrelated and will be referred to generically as an Integrated Flight Guidance System (IFGS).

1.1 This document recommends criteria for electronic convective weather displays and indicators on the flight deck during the cruise, climb and descent phases of the flights. Windshear and microburst detection is addressed in ARP 4102/11D. 1.2 This ARP includes onboard weather radar, as well as other methods of identifying convective weather. It is recognized that radar is the primary means used today, but these criteria can be applied to any future technology that might be developed.

This document recommends criteria to assure adequate visibility from the flight deck. The flight deck windshield must provide sufficient external vision to permit the pilot to perform any maneuvers within the operating limits of the aircraft safely and at the same time afford and unobstructed view of the flight instruments and other critical components and displays from the same eye position.

This document establishes the minimum requirements for seats and restraint systems for the flight deck. Due to limitations that it would place upon basic aircraft design, it is not considered practical for these requirements to apply fully to the observer seat. However, it is emphasized that every effort should be made to provide the observer seat position with an equivalent level of comfort and safety. This document is also intended to make recommendations for flight crew restraint systems. A properly designed crew restraint system will mminimize injury or debilitation during a survivable crash and enable post crash assistance to occupants and escape from the aircraft. Crew member safety is the primary objective, with appropriate provisions for crew comfort taken into consideration. The criteria established herein are designed to standardize restraint systems without hindering the development of new, improved systems.

This document establishes the minimum requirements for seats and restraint systems for the flight deck. Due to limitations that it would place upon basic aircraft design, it is not considered practical for these requirements to apply fully to the observer seat. However, it is emphasized that every effort should be made to provide the observer seat position with an equivalent level of comfort and safety. This document is also intended to make recommendations for flight crew restraint systems. A properly designed crew restraint system will minimize injury or debilitation during a survivable crash and enable post crash assistance to occupants and escape from the aircraft. Crew member safety is the primary objective, with appropriate provisions for crew comfort taken into consideration. The criteria established herein are designed to standardize restraint systems without hindering the development of new, improved systems.

This document recommends design criteria for the Flight Deck Alerting System. The FAS shall enhance safety of flight by providing early crew recognition of aircraft system or component status or malfunction as well as of crew operational error. The FAS, therefore, relates to aircraft configuration and flight phase as well as the aircraft systems. To fulfill this objective, the FAS must attract the attention of the crew, must state with clarity the nature and location of the problem, and must be highly reliable and thoroughly responsive to the operational requirements and environment. Wherever possible, it should provide guidance as to the corrective action.

This document recommends design criteria for the Flight Deck Alerting System. The FAS shall enhance safety of flight by providing early crew recognition of aircraft system or component status or malfunction as well as of crew operational error. The FAS, therefore, relates to aircraft configuration and flight phase as well as the aircraft systems. To fulfill this objective, the FAS must attract the attention of the crew, must state with clarity the nature and location of the problem, and must be highly reliable and thoroughly responsive to the operational requirements and environment. Wherever possible, it should provide guidance as to the corrective action.

This document recommends criteria for electronic displays on the flight deck of transport aircraft. Electronic displays include electronic flight instruments, alert displays, aircraft system displays and control/display units for flight management and radio management systems.

This document recommends criteria for electronic displays on the flight deck of transport aircraft. Electronic displays include electronic flight instruments, alert displays, aircraft system displays and control/display units for flight management and radio management systems.

This document is intended to establish preferred abbreviations and acronyms for terms used on panels, controls, displays, instruments, placards, and markings. The recommendations apply to equipment used by crew members in the flight deck of transport aircraft.

This document is intended to establish preferred abbreviations for terms used on panels, controls, displays, instruments, placards, and markings. The recommendations apply to equipment used by crew members in the flight deck of transport aircraft. The abbreviations, acronyms, and symbols do not supersede those used in airworthiness regulations or aeronautical charts or other aircraft documents.

This document is intended to establish preferred abbreviations and acronyms for terms used on panels, controls, displays, instruments, placards, and markings. The recommendations apply to equipment used by crew members in the flight deck of transport aircraft.

This document is intended to establish preferred abbreviations for use on panels, controls, instruments, displays, placards and markings. The recommendations apply to terms used in the flight deck of transport aircraft. The abbreviations, symbols and codes do not supersede those used in airworthiness regulations or aeronautical charts and documents. Where conflict is possible, the operational context must be such as to resolve any ambiguity. If doubt exists, an alternative abbreviation or less truncated abbreviation should be used.